So you have an Xbox 360 and it just crashed on you, what should you do? You have to be really careful when handling your Xbox 360. I’m sure that you treat this game console like as an investment that you do not want to see just gathering dust.

However, how do you fix your Xbox 360 then?

You can always send your Xbox 360 to Microsoft every time it does through a phase. But not a lot of gamers take this route. First reason is that sending your Xbox 360 to Microsoft can really put a dent in your wallet.

And you can’t afford to keep sending your console all the time. And it really takes a long while before your console is returned to you.

The most cost efficient way to repairing your Xbox 360 is to do it yourself. You can try repairing your Xbox 360 without going through too much hassle. The very basic thing that you need is just an Xbox 360 repair guide which you buy right off the internet. And there are so many repair guides to choose from.

Before you get started with everything, you have to scrutinize the Xbox 360 repair guide that you want to purchase because not every guide can pass the cut. You have to make sure that the instructions are clear and easy to follow. It helps if the guide also has pictures and illustrations to help you through the process.

Another thing that you would want to look into is whether or not your repair guide has any videos along with the pdf file. What is so great with videos is that you can see all the steps being demonstrated. Some repair guides have websites with videos that they currently upgrade as well as online support.

Lastly, make sure that you read the fine print when it comes to your Xbox 360 repair guide. Some will only provide troubleshooting information for one single problem while others provide support for an entire slew.

Also check out their refund policies.

Stop. To learn more information about xbox 360 repair guide then visit my website. And checkout my im eye review site soon.

This article describes how you can transfer the hard drive for xbox 360 using the Drive Transfer Kit to transfer all content from one hard drive to another

You will need :

An Xbox 360 console

Two Xbox 360 hard drives

Data transfer cable (included with the Xbox 360 Hard Drive Transfer Kit)

This could be bundled when you purchase the Xbox 360 Hard Drive

Data transfer software (included with the Xbox 360 Hard Drive Transfer Kit)

The Xbox 360 Hard Drive Transfer Kit transfers all content to another hard drive. Read the users guide which you get with the Xbox 360 Hard Drive Transfer Kit.

You can transfer all content from one Xbox 360 hard drive (this is called the “source”) to another Xbox 360 hard drive (this is known as the “destination”). The content from the source hard drive overwrites the data on the destination hard drive.

Needless to say content is only able to be moved to another hard drive provided that the destination hard drive is the same size or bigger than the source hard drive

When the transfer is finished, the content on the destination hard drive will be replaced with the content from the source hard drive. This data includes your saved games and Xbox LIVE downloads. After the transfer is finished, the content on the source hard disk is erased.

Film rentals

Films you’ve rented on the source hard drive will not be available after the transfer. Make sure that you watch all Xbox LIVE Marketplace movie rentals prior to using the Hard Drive Transfer Kit.

Using the Hard Drive Transfer Kit

Warning with any transfer, there is a small risk that some or all of your content could possibly be lost during the transfer.

Only one hard drive can be connected to your Xbox 360 console at a time. The transfer cable cannot be used to connect multiple hard drives to your console at the same time.

To transfer all content from one hard drive to another

Switch off your Xbox 360 console with your current hard drive (the “source” drive) attached.

Disconnect all accessories from the console.

Switch on the console. Connect a controller and turn it on. You need to use a controller during the content transfer.

Connect the transfer cable to the hard drive that you are moving content to (the “destination” hard drive).

Important The transfer cable connects to the destination hard drive in only one orientation. Don’t force the connector on.

Connect the transfer cable to the destination hard drive in the orientation shown below.

Plug the other end of the transfer cable into the USB port on the back of your Xbox 360 console.

Important Do not plug the transfer cable into a USB port on the front of your Xbox 360 console.

Load the Xbox 360 Hard Drive Transfer Disc (included with the transfer kit) into your Xbox 360 console. Instructions will appear on the screen

The transfer process can take more than 60 minutes, depending on the amount of content on the source hard drive.

The Xbox Dashboard is not available during the content transfer.

If the transfer is interrupted for any reason, your data will remain on the source hard drive. You are able to restart the transfer process at any time until the process is complete.

To remove your Xbox 360 hard drive

1.Switch off your Xbox 360 console.

2.Locate the hard drive on the top of your console (or on the left side, according to how your console is positioned).

3.Press the release button on the hard drive.

4.Lift the hard drive away from the console.

To attach your hard drive

1.Turn off your Xbox 360 console.

2.Position the back of the hard drive against the back of the hard drive bay.

3.Push the front end of the hard drive down until it clicks in place.

Note If your console did not previously have a hard drive, you will need to remove the hard drive bay cover before attaching a hard drive.

If you are seriously looking at an XBOX 360 hard drive visit http://xbox360premium.net/xbox-360-hard-drive This useful web site has information on all the models and the best prices on the webAND you can purchase with 100% confidence.